Wolverine 41" Model 41-2 HLRE Hydraline 2-color stack Flexographic printing press for inline operation. 41" web width. 40" print width. Two color print stations. One of the two print stations has a Harris Bruno enclosed doctor blade assembly, ceramic anilox roll on station that has doctor blade assembly, the other is a standard 3-roll flexo print station. Press was last printing on film, cellophane, PVC, polypropylene. 10 pitch gearing. Capable of printing on papers, films, laminations, board, nonwovens, fabrics. Could be put inline with blown film extruder, paper bag machine, sheeter, slitter rewinders, coaters, laminators. 10-40" repeat range. Stainless steel ink pan. Press features manual registration control at each print station. Side register control at each print station, 360 degree registration. You can set the registration while machine is running. Independent speed control of ink rollers. Variable speed hydraulic fountain drive at each print station. Water-based inks. Each color station is equipped with a free-wheeling clutch which allows the transfer & ink rollers to rotate continuously powered by hydraulic drive during the shut down i.e. has constant rotating ink of the anilox & rubber rolls when the machine is in an off position. Has hydraulic pump to operate constant rotation & automatic pickup when machine stops. Two print cylinders are included. 41.5" chrome-plated impression cylinder, 8" dia. 42" wide rubber roll, 5" dia. 42" wide anilox roll, 5" dia. Automatic plate cylinder lift during stop plate cylinders automatically lifted. Includes hydraulic tank & reservoir. Blower boxes for in-between color station drying. Mechanical speed of HLRE 700 FPM. Pulley for drive connection. Machine is in good mechanical condition. Age of printer approx. 1980. This print station could be put on top of an existing Wolverine print station to make additional colors.
41" Wolverine 2-color Stack Printing Press